








Description du produit
Disponible en stock à Hunan, en Chine : une excavatrice hydraulique sur chenilles Sany SY205C de 2020, une machine de la classe des 20 tonnes ayant travaillé sur des terrassements généraux. Elle est disponible pour une inspection sur site, un démarrage et un essai de fonctionnement à tout moment, ce qui permet aux acheteurs de vérifier les fonctions de translation, d'orientation et de creusement avant de s'engager.
- Année de fabrication : 2020
- Marque : Sany
- Modèle : SY205C
- Type de machine : excavatrice sur chenilles de la classe des 20 tonnes
- Application principale : terrassement en masse, chargement et excavation générale
- Localisation : Hunan, Chine
- Essai de fonctionnement : la machine peut être démarrée et utilisée sur site pour vérification par l'acheteur
La configuration est standard pour ce modèle ; aucune spécification rare ou sur commande spéciale n'est revendiquée. Les heures de travail, l'historique d'entretien et l'état du train de roulement peuvent être confirmés directement lors de la visite d'inspection. Convient aux entrepreneurs, aux flottes de location et aux acheteurs à l'export à la recherche d'une excavatrice sur chenilles de taille moyenne. Contactez-nous pour organiser une visite et une démonstration de fonctionnement à Hunan.
Notes on a few choices, in case you're publishing this: - **"20-tonne class"** → *classe des 20 tonnes*. French buyers in the TP (travaux publics) trade usually say *pelle* rather than *excavatrice*, but *excavatrice* reads better for international/export listings and matches "excavator" literally. If this page targets French contractors domestically, swap to *pelle hydraulique sur chenilles* throughout. - **"trial operation"** → *essai de fonctionnement*. More precise than a literal *essai d'opération*, and it's the standard wording in machinery sale ads. - **"travel, swing and digging"** → *translation, orientation et creusement*. These are the conventional French terms for the three functions (travel = translation, swing = orientation/rotation). - **"special-order"** → *sur commande spéciale*; for a used-equipment listing, *aucune spécification rare ou hors série* is also common and slightly tighter. - Kept the colon spacing as French typography requires (space before `:` and `;`).| Spécifications | Valeur |
|---|---|
| No. | 1156983 |
| Tonnage (tons) | 20 |
| Working weight (kg) | 21500 |
| Bucket capacity (m³) | 0.9~1.1(1.0) |
| power | Traditional power |
| manufacturer | Made in China |
| bucket | backhoe |
| Rated power (kw/rpm) | 118/2000 |
| Ground specific pressure (Kpa) | 47.3 |
| Rotation speed (rpm) | 11 |
| Climbing ability (%) | 70% / 35 ° |
| Bucket digging force (kN) | 138 |
| Rod digging force (kN) | 109 |
| Travel speed (km/h) | 5.4/3.3 |
| Total transport length (mm) | 9680 |
| Total transport width (mm) | 2980 |
| Total transport height (mm) | 3440 |
| Full cab height (mm) | 3075 |
| Minimum ground clearance (mm) | 440 |
| Minimum turning radius of front working device (mm) | 3730 |
| Back end turning radius (mm) | 2900 |
| Onboard width (mm) | 2875 |
| Total track length (mm) | 4160 |
| Track gauge (mm) | 2380 |
| Track plate width (mm) | 600 |
| Track ground length (mm) | 3360 |
| Maximum height at minimum turning radius (mm) | 7680 |
| Maximum digging radius (mm) | 10280 |
| Maximum digging depth (mm) | 6600 |
| Maximum excavation height (mm) | 9600 |
| Maximum unloading height (mm) | 6730 |
WhatsApp
Facebook










FAQs
WhatsApp