Used Water Well Drilling Rig 300m for Africa — How to Match Output to Groundwater?

A used 300 m water-well rig is the right choice for rural boreholes across Africa when its pullback, mud-pump and rod capacity match local geology. Expect an indicative USD 45,000–110,000 FOB Shanghai; the mud-pump condition and rod rack decide daily output more than the nameplate depth.

What Are the Core Specs and Where Does a 300m Rig Fit?

Field	Typical value on a 300m water-well rig
Max drilling depth	300 m
Pullback force	120–180 kN
Mast / derrick height	9–12 m
Mud pump	BW250 / BW320, 15–22 kW
Rod length / rack	3 m rods, 12–16 capacity
Drilling method	Mud rotary / DTH
Engine power	75–110 kW
Tooling included	Bits, rods, mud pump

A 300 m class rig covers most community and irrigation boreholes in sub-Saharan Africa. For hard-rock aquifers, add a DTH hammer and a matched compressor; for high-yield sand, rely on the mud rotary system.

How to Inspect a Used Water-Well Rig's Condition?

Derrick / mast: check for bend, weld repairs, and crown-block wear.
Mud pump: verify pressure and flow; a worn liner cuts output fast.
Rod rack and threads: look for bent rods and corroded threads.
Pullback winch: test line pull and brake holding.
Rotary head: confirm torque; listen for backlash.
Electronics / gauges: confirm hour meter and pressure gauges read true.

What Does a Used 300m Rig Cost, and What's the Export Process?

Indicative ranges by condition:

Reconditioned: USD 90,000–110,000
Working, average wear: USD 65,000–88,000
Project-retired: USD 45,000–62,000

Export steps: inspection video → proforma invoice → secure derrick and rods for 40HQ → lashing and booking → Shanghai export declaration → Bill of Lading. We supply export documents; import clearance in the destination country is the buyer's responsibility.

What Are the Common Pitfalls and Who Handles Customs?

Pitfall 1: "300m" capacity quoted but only a 200m rod set supplied.
Pitfall 2: Mud-pump liners worn — output drops below the aquifer demand.
Pitfall 3: Arrival without the buyer's import permit for drilling equipment.
Responsibility: seller provides export documents and honest condition reports; import duty, VAT and clearance are the buyer's scope. We do not promise "包清关 / 包税".

How We Evaluated These Rigs

We ranked water-well rigs by logged metres, third-party mud-pump and rod inspection, and a live pullback test. Each unit passed a pressure test before listing. Figures above are indicative and confirmed against the unit's inspection file.

Which Used Water-Well Rigs We Recommend (3–5 Units)

For boreholes across Africa, the 300 m-class rigs below are in stock and checked per the condition list. Prices are indicative EXW China. Each links to its live listing; full inventory: FairTradeMachinery rigs.

Model	Max depth / method	Engine / pull	Year / hours	Indicative price (EXW)
ZEGA ZGYX-420	300 m / water well	110 kW / 18 t pull	2022 / see listing	US$ 48,000–68,000
ZEGA ZGYX-452	300 m / DTH + mud	176 kW / 22 t pull	2023 / see listing	US$ 55,000–78,000
Kaishan KG420	300 m / DTH + mud	97 kW / 13 t pull	2021 / see listing	US$ 40,000–58,000
Kaishan KG940A	350 m / DTH	132 kW / 16 t pull	2017 / see listing	US$ 58,000–82,000
Kaishan KT7C	300 m / DTH + mud	140 kW / 16 t pull	2020 / see listing	US$ 52,000–74,000

FAQ

Can it reach 300m in hard rock?

With a DTH hammer and matched compressor, yes; mud rotary alone suits softer strata.

Is the mud pump included?

A BW250/BW320 pump is included unless stated.

How long to Africa?

About 30–40 days from Shanghai plus clearance.

Do you test the pump under load?

Yes, every listed rig includes a pump and pullback test video.

Does it fit a 40HQ?

The derrick secures down and rods stack inside; we send the lashing plan.

Sources

Nigeria Customs Service — import procedures and HS classification for water-well rigs: https://customs.gov.ng/
Standards Organisation of Nigeria (SON) — SONCAP conformity programme: https://son.gov.ng/
Freight rate reference: Q3 2026 quotations, Shanghai to Apapa, available on request.
FairTradeMachinery — used drill rig inventory (live models & specs): /rigs.html

Published: 2026-10-29 · Last reviewed: 2026-10-26 · Author: 【Pace 】Equipment Inspector, FairTradeMachinery

FairTradeMachinery

Vous concevez la vision. Nous nous occupons des parties difficiles.

Aider les acheteurs mondiaux à accéder à des machines et des solutions après-vente de meilleure valeur.

En tant que principale plateforme mondiale d'échange de machines d'occasion en Chine, nous nous situons à l'intersection de la technologie IoT et du commerce B2B. Cela signifie des données d'inventaire en temps réel, des profils de vendeurs vérifiés et un processus de transaction conçu pour les acheteurs transfrontaliers qui ne peuvent pas toujours inspecter les machines en personne. Nos utilisateurs en Chine ont dépassé 1,5 million, ce qui signifie que nous avons la première source de propriétaires de pelles et le nombre équivalent de machines. Cela signifie que nous pouvons couvrir tous les modèles populaires et même des besoins spécifiques, quel que soit l'état.