










Description du produit
Excavatrice hydraulique d'occasion Komatsu PC450-8 de 2012, proposée depuis Zhejiang, Chine. La machine est décrite comme une unité en état de marche, actuellement sur site, adaptée aux acheteurs recherchant une pelle hydraulique lourde disponible pour une évaluation sur place dans le cadre de travaux de terrassement, de soutien minier, de construction routière ou de préparation de chantiers à grande échelle. En tant que pelle sur chenilles Komatsu de taille intermédiaire reconnue, la PC450-8 est couramment choisie pour des travaux de creusement et de chargement exigeants, tandis que l'état final doit être confirmé par une inspection directe et les registres d'exploitation disponibles.
Faits vérifiés : Komatsu, modèle PC450-8, année 2012, état d'occasion et en fonctionnement, localisation Zhejiang, Chine, statut disponible pour une visite sur site. Les acheteurs nécessitant des informations sur les équipements, l'état du train de roulement, l'historique d'entretien ou un essai de fonctionnement sont invités à demander des informations détaillées avant l'achat. FairTradeMachinery présente cette unité comme une option pratique pour les entrepreneurs et les équipes opérationnelles à la recherche d'une catégorie éprouvée d'excavatrice d'occasion avec accès à une inspection locale.
| Spécifications | Valeur |
|---|---|
| No. | 1188964 |
| Tonnage (tons) | 45 |
| Working weight (kg) | 45125 |
| Bucket capacity (m³) | 2.1 |
| Boom length (mm) | 7060 |
| Rod length (mm) | 3380 |
| Country of origin | Japan |
| power | Traditional power |
| manufacturer | Joint venture/Import |
| bucket | backhoe |
| Engine type | Komatsu SAA6D125E-5 |
| Rated power (kw/rpm) | 257/1900 |
| Cooling mode | water-cooling |
| Displacement (L) | 11.04 |
| Working form | 6-cylinder, water-cooled, direct injection, turbocharged, electronic speed regulation; Cylinder diameter × stroke :125mm×150mm |
| Ground specific pressure (Kpa) | 84.1 |
| Rotation speed (rpm) | 9.1 |
| Climbing ability (%) | 70/35 ° |
| Bucket digging force (kN) | 278 |
| Rod digging force (kN) | 233 |
| Travel speed (km/h) | 3.0/4.2/5.5 |
| Rotary hydraulic motor type | Axial plunger type ×1 |
| Type of walking hydraulic motor | Axial plunger type x 2 |
| Maximum flow of main pump (l/min) | 690 |
| Traveling Hydraulic Circuit (Mpa) | 37.3 |
| Rotary Hydraulic Circuit (Mpa) | 27.9 |
| Control Hydraulic Circuit (Mpa) | 3.2 Pilot oil circuit |
| Hydraulic crushing pipeline is standard | no |
| Bucket cylinders - Number × diameter × stroke (mm) | 160 * 1270 * 110 |
| Bucket rod cylinders - Number × diameter × stroke (mm) | 185 * 1985 * 130 |
| Boom cylinders - Number × diameter × stroke (mm) | 160 * 1570 * 110 |
| Fuel Tank (L) | 650 |
| Hydraulic Tank (L) | 248 |
| Engine Oil changes (L) | 37 |
| Coolant (L) | 36 |
| Total transport length (mm) | 12040 |
| Total transport width (mm) | 3580(3082 when contracted) |
| Total transport height (mm) | 3660 |
| Full cab height (mm) | 3285 |
| Counterweight ground clearance (mm) | 1320 |
| Minimum ground clearance (mm) | 555 |
| Back end turning radius (mm) | 3605 |
| Total track length (mm) | 5055 |
| Track gauge (mm) | 2890(2392 when contracted) |
| Track plate width (mm) | 600 |
| Total track width (mm) | 3490(2992 when contracted) |
| Track ground length (mm) | 4020 |
| Maximum digging radius (mm) | 12005 |
| Maximum digging depth (mm) | 7790 |
| Maximum excavation height (mm) | 10925 |
| Maximum unloading height (mm) | 7625 |
| Maximum vertical digging depth (mm) | 6600 |
| Bulldozer lift or depth (mm) | No dodging plate |
| Maximum excavation radius of stop surface (mm) | 11800 |
WhatsApp
Facebook










FAQs
WhatsApp