







Description du produit
2020 Komatsu PC200-8N1 used excavator for sale in Peking, China. This machine is presented as an original Komatsu 200-class unit with a clean, consistent body condition and original paint. The seller notes pure earthwork use, with no hammering application reported. Major components are described as free from oil leakage, supporting stable daily operation.
Undercarriage condition is stated as approximately 80% new, suitable for continued heavy-duty site duty. Detailed photos and video are available to support remote inspection and buyer verification. Ideal for contractors seeking a well-maintained, documented used excavator with a straightforward operating history.
- Original Komatsu 200-class configuration; pure earthwork use, no hammering reported; original paint and neat condition; major parts no oil leakage; undercarriage approx. 80% new; detailed photos and video available; located in Peking, China
| Spécifications | Valeur |
|---|---|
| No. | 1188701 |
| Tonnage (tons) | 20 |
| Working weight (kg) | 19500 |
| Bucket capacity (m³) | 0.8 |
| Rod length (mm) | 2900 |
| Country of origin | Japan |
| power | Traditional power |
| manufacturer | Joint venture/Import |
| bucket | backhoe |
| Engine type | Komatsu SAA6D107E-1-A |
| Rated power (kw/rpm) | 110/2000 |
| Cooling mode | water-cooling |
| Number of cylinders (PCS) | 6 |
| Displacement (L) | 6.69 |
| Working form | Direct injection |
| Ground specific pressure (Kpa) | 44.1 |
| Rotation speed (rpm) | 12.4 |
| Bucket digging force (kN) | 149 |
| Rod digging force (kN) | 108 |
| Travel speed (km/h) | 5.5/4.1/3.0 |
| Rotary hydraulic motor type | Fixed displacement axial piston motor |
| Type of walking hydraulic motor | Variable axial piston motor |
| Traveling Hydraulic Circuit (Mpa) | 37.3 |
| Working Hydraulic Circuit (Mpa) | 34.8 |
| Fuel Tank (L) | 400 |
| Hydraulic Tank (L) | 135 |
| Hydraulic System (L) | 232 |
| Total transport length (mm) | 9425 |
| Total transport width (mm) | 2800 |
| Total transport height (mm) | 3040 |
| Minimum turning radius of front working device (mm) | 3040 |
| Back end turning radius (mm) | 2750 |
| Total track length (mm) | 4070 |
| Track gauge (mm) | 2200 |
| Track plate width (mm) | 600 |
| Maximum digging radius (mm) | 9875 |
| Maximum digging depth (mm) | 6620 |
| Maximum excavation height (mm) | 10000 |
| Maximum unloading height (mm) | 1110 |
| Maximum excavation radius of stop surface (mm) | 9700 |
WhatsApp
Facebook










FAQs
WhatsApp