






Description du produit
Excavatrice Komatsu PC110-7 d'occasion, une machine lourde de 2020 actuellement située au Sichuan, en Chine. Cette excavatrice sur chenilles hydraulique de taille moyenne convient aux entrepreneurs, aux équipes de travaux civils et aux revendeurs d'équipements à la recherche d'une machine compacte pour les travaux d'excavation, de tranchées, de chargement, de remblayage, de préparation de terrain et de terrassement général. L'annonce est basée sur les informations disponibles du vendeur et doit être confirmée par une inspection sur site, des registres d'entretien, une vérification du numéro de série et des dispositions de transport.
-
• Marque : Komatsu
• Modèle : PC110-7
• Année : 2020
• Type de machine : excavatrice
• Emplacement : Sichuan, Chine
• État : d'occasion, détails à vérifier
• Référence originale : annonce Komatsu 110-8mo associée mentionnée à environ 80 000+ ; le prix final nécessite une confirmation séparée
• Note d'exportation : confirmer la disponibilité, la documentation et les conditions de paiement avant l'achat
• Les acheteurs doivent demander des photos, les heures de fonctionnement et les détails des équipements
| Spécifications | Valeur |
|---|---|
| No. | 1189891 |
| Tonnage (tons) | 11 |
| Working weight (kg) | 10980 |
| Bucket capacity (m³) | 0.48 |
| Boom length (mm) | 4260 |
| Rod length (mm) | 2260 |
| Country of origin | Jining, Shandong Province |
| power | Traditional power |
| manufacturer | Joint venture/Import |
| bucket | backhoe |
| Engine type | Komatsu SAA4D95LE-3 |
| Rated power (kw/rpm) | 65/2200 |
| Cooling mode | water-cooling |
| Cylinder diameter × stroke (mm) | 95 x 115 |
| Displacement (L) | 3.26 |
| Working form | 4 stroke, after cooling, direct injection; Comply with 2001 EPA/EU/ Japan Level 2 emission standards. |
| Ground specific pressure (Kpa) | 0.37 |
| Rotation speed (rpm) | 11 |
| Climbing ability (%) | 70/30 ° |
| Bucket digging force (kN) | 86 |
| Rod digging force (kN) | 56 |
| Travel speed (km/h) | 2.7-5.5 |
| Rotary hydraulic motor type | Axial piston motor ×1(rotary holding valve) |
| Type of walking hydraulic motor | Axial piston motor ×2(with parking brake) |
| Maximum flow of main pump (l/min) | 226L/min |
| Traveling Hydraulic Circuit (Mpa) | 355 |
| Rotary Hydraulic Circuit (Mpa) | 295 |
| Control Hydraulic Circuit (Mpa) | 325 |
| Hydraulic crushing pipeline is standard | no |
| Bucket cylinders - Number × diameter × stroke (mm) | 104 x 885 x 60 |
| Bucket rod cylinders - Number × diameter × stroke (mm) | 133 * 1005 * 75 |
| Boom cylinders - Number × diameter × stroke (mm) | 110 * 980 * 65 |
| Fuel Tank (L) | 247 |
| Hydraulic Tank (L) | 90 |
| Engine Oil changes (L) | 11 |
| Coolant (L) | 13.4 |
| Total transport length (mm) | 7170 |
| Total transport width (mm) | 2490 |
| Total transport height (mm) | 2810 |
| Full cab height (mm) | 2810 |
| Counterweight ground clearance (mm) | 855 |
| Minimum ground clearance (mm) | 400 |
| Back end turning radius (mm) | 2110 |
| Total track length (mm) | 3435 |
| Track gauge (mm) | 1990 |
| Track plate width (mm) | 500 |
| Total track width (mm) | 2490 |
| Track ground length (mm) | 2705 |
| Maximum digging radius (mm) | 7730 |
| Maximum digging depth (mm) | 5060 |
| Maximum excavation height (mm) | 7910 |
| Maximum unloading height (mm) | 5650 |
| Maximum vertical digging depth (mm) | 4570 |
| Bulldozer lift or depth (mm) | No bulldozer |
| Maximum excavation radius of stop surface (mm) | 7600 |
| Maximum effective digging depth (mm) | 4730 |
WhatsApp
Facebook










FAQs
WhatsApp