







Description du produit
Cette excavatrice Hyundai R215-7 d'occasion, déclarée comme modèle 2010, est proposée à l'exportation depuis le Jiangsu, en Chine. Le vendeur décrit la machine comme offrant de bonnes performances et étant dispensée d'inspection, ce qui en fait une option pratique pour les entrepreneurs, les travaux de terrassement, le soutien à la démolition et les flottes de construction générales recherchant une excavatrice hydraulique de taille moyenne fiable.
• Marque : Hyundai
• Modèle : R215-7 ; la référence du vendeur mentionne également 215-7C.
• Année : 2010
• Emplacement : Jiangsu, Chine
• État : Bonnes performances, dispensée d'inspection selon le fournisseur.
• Application : Excavation, chargement, creusement de tranchées, préparation de site et soutien à la construction.
Les heures de fonctionnement, l'historique d'entretien, les accessoires, le train de roulement, les performances hydrauliques et toute documentation d'exportation requise doivent être confirmés avant l'achat. Cette annonce reflète uniquement les informations fournies par le vendeur actuellement disponibles et n'implique pas une fiche technique d'usine ou un rapport d'inspection certifié. FairTradeMachinery répertorie cet équipement pour les acheteurs B2B exigeant une divulgation claire des données du vendeur disponibles et une inspection avant expédition.
| Spécifications | Valeur |
|---|---|
| No. | 1190285 |
| Tonnage (tons) | 21 |
| Working weight (kg) | 20700 |
| Bucket capacity (m³) | 0.92 |
| Boom length (mm) | 5650 |
| Rod length (mm) | 2920 |
| Country of origin | Jiangsu (Province) |
| power | Traditional power |
| manufacturer | Joint venture/Import |
| bucket | backhoe |
| Engine type | Hyundai D6BT-C |
| Rated power (kw/rpm) | 110/1950 |
| Cooling mode | water-cooling |
| Cylinder diameter × stroke (mm) | 118 x 115 |
| Number of cylinders (PCS) | 6 |
| Displacement (L) | 7 |
| Working form | Six-cylinder four-stroke turbocharged direct injection engine |
| Ground specific pressure (Kpa) | 47 |
| Rotation speed (rpm) | 12.5 |
| Climbing ability (%) | 70/35 ° |
| Bucket digging force (kN) | 123.3 |
| Rod digging force (kN) | 95.1 |
| Travel speed (km/h) | 3.5/5.2 |
| Main overflow set pressure (Mpa) | 47 |
| Rotary hydraulic motor type | Quantitative swash plate axial piston motor |
| Type of walking hydraulic motor | Variable swash plate axial piston motor |
| Maximum flow of main pump (l/min) | 2 x 220 |
| Traveling Hydraulic Circuit (Mpa) | 280 |
| Rotary Hydraulic Circuit (Mpa) | 240 |
| Main pump type | 2× variable axial piston pump + gear pump |
| Working Hydraulic Circuit (Mpa) | 280 |
| Pilot Oil Circuit (MPa) | 35 |
| Bucket cylinders - Number × diameter × stroke (mm) | 120 * 80 * 1120 |
| Bucket rod cylinders - Number × diameter × stroke (mm) | 140 * 95 * 1570 |
| Boom cylinders - Number × diameter × stroke (mm) | 125 * 85 * 1320 |
| Fuel Tank (L) | 320 |
| Hydraulic Tank (L) | 165 |
| Engine Oil changes (L) | 16.3 |
| Coolant (L) | 32.7 |
| Hydraulic System (L) | 270 |
| Total transport length (mm) | 9510 |
| Total transport width (mm) | 2800 |
| Total transport height (mm) | 2990 |
| Full cab height (mm) | 2920 |
| Counterweight ground clearance (mm) | 1060 |
| Minimum ground clearance (mm) | 480 |
| Back end turning radius (mm) | 2830 |
| Total track length (mm) | 4160 |
| Track gauge (mm) | 2200 |
| Track plate width (mm) | 600 |
| Total track width (mm) | 2800 |
| Track ground length (mm) | 3360 |
| Maximum digging radius (mm) | 9930 |
| Maximum digging depth (mm) | 6800 |
| Maximum excavation height (mm) | 9730 |
| Maximum unloading height (mm) | 6910 |
| Maximum vertical digging depth (mm) | 6060 |
| Bulldozer lift or depth (mm) | There is no |
| Dodging plate width × height (mm) | There is no |
| Maximum excavation radius of stop surface (mm) | 9760 |
| Maximum effective digging depth (mm) | 6610 |
WhatsApp
Facebook










FAQs
WhatsApp