










Description du produit
À vendre : pelle sur chenilles Hitachi ZX250H-3G de 2011, unité originale importée située dans la province du Zhejiang, en Chine. Cette machine est dotée d'une peinture d'origine usine, d'une commande des gaz manuelle et d'un moteur Isuzu, le tout dans un état général propre. L'unité est proposée en l'état, issue d'une flotte d'occasion, avec des notes d'utilisation honnêtes à l'intention des acheteurs industriels. Le moteur et la zone du train de roulement semblent secs et bien entretenus, tandis que la réponse hydraulique présente une faiblesse au ralenti. Avec une accélération plus élevée, la machine peut encore assurer le maintien en charge et les travaux de levage dans une plage limitée. Des photos détaillées et une vidéo sont disponibles pour faciliter l'inspection et l'évaluation à distance.
- Année : 2011
- Marque : Hitachi
- Modèle : ZX250H-3G
- Origine : Unité originale importée
- Moteur : Isuzu
- État : Peinture d'origine usine, commande des gaz manuelle, compartiment moteur propre
- Note d'utilisation : Mouvement faible au ralenti ; acceptable sous forte accélération
- Localisation : Zhejiang, Chine
- Médias : Photos détaillées et vidéo disponibles
| Spécifications | Valeur |
|---|---|
| No. | 1191080 |
| Tonnage (tons) | 25 |
| Working weight (kg) | 24600 |
| Bucket capacity (m³) | 1.2 Rock Type |
| Boom length (mm) | 6.00(H type) |
| Rod length (mm) | 2.96(H type) |
| Country of origin | Japan |
| power | Traditional power |
| manufacturer | Joint venture/Import |
| bucket | backhoe |
| Engine type | ISUZU CC-6BG1T |
| Rated power (kw/rpm) | 125/2100 |
| Cooling mode | water-cooling |
| Cylinder diameter × stroke (mm) | 105 x 125 |
| Number of cylinders (PCS) | 6 |
| Displacement (L) | 6.494 |
| Working form | 4 stroke, water cooled, direct injection, turbocharged, intercooled |
| Ground specific pressure (Kpa) | 54 |
| Rotation speed (rpm) | 13.5 |
| Climbing ability (%) | 70 |
| Bucket digging force (kN) | 18000 |
| Rod digging force (kN) | 125 |
| Travel speed (km/h) | 3.6/5.5 |
| Rotary hydraulic motor type | Axial piston motor |
| Type of walking hydraulic motor | Variable axial piston motor ×2 |
| Maximum flow of main pump (l/min) | 204 x 2 |
| Traveling Hydraulic Circuit (Mpa) | 34.8 |
| Rotary Hydraulic Circuit (Mpa) | 31.4 |
| Main pump type | Variable axial piston pump ×2 |
| Working Hydraulic Circuit (Mpa) | 34.3 |
| Pilot Oil Circuit (MPa) | 3.9 |
| Bucket cylinders - Number × diameter × stroke (mm) | 1-130x90 |
| Bucket rod cylinders - Number × diameter × stroke (mm) | 1-140 x 105 |
| Boom cylinders - Number × diameter × stroke (mm) | 2-125 x 85 |
| Fuel Tank (L) | 380 |
| Hydraulic Tank (L) | 148 |
| Engine Oil changes (L) | 25 |
| Coolant (L) | 23 |
| Hydraulic System (L) | 303 |
| Total transport length (mm) | 10140 |
| Total transport width (mm) | 2990 |
| Total transport height (mm) | 3100 |
| Full cab height (mm) | 3020 |
| Counterweight ground clearance (mm) | 1090 |
| Minimum ground clearance (mm) | 460 |
| Back end turning radius (mm) | 2940 |
| Total track length (mm) | 4260 |
| Track gauge (mm) | 2390 |
| Track plate width (mm) | 600 |
| Total track width (mm) | 2990 |
| Track ground length (mm) | 3460 |
| Maximum digging radius (mm) | 10270 |
| Maximum digging depth (mm) | 6950 |
| Maximum excavation height (mm) | 9630 |
| Maximum unloading height (mm) | 6760 |
| Maximum vertical digging depth (mm) | 6020 |
| Bulldozer lift or depth (mm) | There is no |
| Dodging plate width × height (mm) | There is no |
| Boom turning Angle (left/right °) | There is no |
WhatsApp
Facebook










FAQs
WhatsApp