Used Hammer Crushers for Sale — 5–300 t/h, Inspected Before Shipment

FairTradeMachinery stocks used hammer crushers in three size classes, from 400 mm to 1600 mm rotor width, covering 5–300 t/h at a 25 mm discharge. Every unit is inspected before loading, ships with a full set of spare hammers, and carries a 1-year warranty on the rotor assembly, bearings and drive motor.

Available size classes

Stock changes weekly. The table below shows what we normally hold and the specification range for each class — use it to identify the class you need, then ask for the current units in that class with photos and a run video.

Table 1. Used hammer crusher classes in stock

Class	Typical model	Rotor width	Max feed	Discharge	Capacity	Motor	Used price (FOB China)
Small	PC400×300 / PC600×400	400–600 mm	≤ 250 mm	≤ 10 mm	5–20 t/h	15–30 kW	USD 3,000–8,000
Medium	PC800×600 / PC1000×800	800–1000 mm	≤ 600 mm	≤ 25 mm	35–90 t/h	55–110 kW	USD 8,000–20,000
Heavy single-stage	PCZ1212 / PCZ1615	1200–1600 mm	600–1800 mm	≤ 25 mm	100–300 t/h	160–400 kW	USD 20,000–45,000

Which class fits your material?

Material hardness and moisture decide the class and the grate design more than the required tonnage does. Match your feed against Table 2 before you shortlist a unit.

Table 2. Material-to-class selection

Material	Compressive strength	Recommended class	Grate design	Watch out for
Limestone (quarry-run)	60–100 MPa	Medium or heavy	Standard grate	Silica content above 8% shortens hammer life sharply
Coal / coke	20–40 MPa	Small or medium	Standard grate	Dust control; check explosion-proof motor requirement locally
Gypsum / chalk	20–40 MPa	Small or medium	Wide-gap grate	Material builds up on wet grates; keep moisture under 10%
Slag / clinker	60–120 MPa	Medium	Heavy-duty grate	Abrasive; budget for hammer changes every 300–400 hours
Brick and tile waste	30–70 MPa	Small	Standard grate	Mixed feed size; fit a vibrating feeder
Basalt / granite / river gravel	> 150 MPa	Not suitable	—	Use a jaw crusher plus cone or impact crusher instead

If your feed exceeds 100 MPa or carries more than 15% moisture, a standard hammer crusher is the wrong machine. Tell us the material and we will say so before quoting — the selection logic is set out in our hammer crusher buying guide.

What condition grade means here?

We grade every used crusher on three measurable criteria — rotor wear, housing condition and wear-part life remaining — rather than on appearance. The grade is stated on the unit page and on the inspection report.

Grade	Rotor and hammers	Housing / liners	Bearing condition	Best for
A	Original hammers with under 20% weight loss; shaft within tolerance	Original paint, no re-welds	No play, no heat marks	Buyers who need to commission within a week
B	Hammers at 20–40% loss; replacement set included	Minor liner wear, sound structure	Slight play within service limit	Most quarry and cement plant buyers
C	Rotor serviceable, hammers at end of life	Visible liner wear, no cracks	Bearings to be replaced	Buyers with in-house workshop and a lower budget

What ships with every unit?

· Inspection report — rotor run-out, bearing play, hammer weight sample, grate gap measurement, housing crack check, all dated and signed.

· Run video of the actual unit — cold start, 10–15 minutes at operating speed, discharge check. Not stock footage.

· One full set of spare hammers and a spare set of grate bars, loaded with the machine.

· Operation and parts manual, plus the wear-part list with standard pattern numbers so you can source locally next time.

· 1-year warranty on core components — rotor assembly, bearings and drive motor. Details in our warranty announcement.

Shipping and lead time

Small and medium units load into a 40 ft container; heavy single-stage units ship on a flat rack or break-bulk. Standard lead time is 7–10 days from contract to loading at Shanghai or Qingdao, then 25–40 days of sea freight depending on destination. We handle export documentation, and can quote CIF or DDP where you need a single landed number. Payment terms and staging are explained in how to pay for a second-hand machine overseas.

Frequently asked questions

What does a used hammer crusher cost?

FOB China: USD 3,000–8,000 for small class, 8,000–20,000 for medium, and 20,000–45,000 for heavy single-stage units. Spare hammers, grate bars and a 40 ft container freight add roughly USD 4,000–7,500 depending on destination.

Can you supply a hammer crusher for limestone at 100 t/h?

Yes. A PCZ1212 heavy single-stage unit with a 1200 mm rotor and a 160–220 kW motor covers 100–150 t/h at a 25 mm discharge, provided feed stays under 800 mm and moisture under 10%.

Do used crushers come with new hammers?

Every unit ships with one full spare set of hammers and a spare set of grate bars. Grade A units normally still have their original hammers fitted with under 20% weight loss.

How do I verify condition before paying?

You receive the signed inspection report and a run video of the specific unit, including hammer weight measurements and bearing play. Third-party inspection at our yard is welcome, and payment is staged against inspection and shipping documents.

What is the warranty on a used hammer crusher?

One year on the rotor assembly, bearings and drive motor, with no extra fee and no separate service contract. Wear parts — hammers, grate bars and liners — are excluded, as is normal for consumables.

Can you supply the whole crushing line, not just the crusher?

Yes. We source feeders, jaw crushers, impact crushers, vibrating screens and conveyors to match the unit you buy, and quote the line as a single shipment where the port allows.

Ready to shortlist? Send your material type, max feed size, required t/h and discharge size through the contact page and we will reply with the matching units in stock, priced and with video. If you also need the loading side of the plant, browse our used Caterpillar excavators or see the full brand list.

Page last reviewed: October 21, 2026 · Stock and prices updated weekly · FairTradeMachinery Editorial Team

FairTradeMachinery

Vous concevez la vision. Nous nous occupons des parties difficiles.

Aider les acheteurs mondiaux à accéder à des machines et des solutions après-vente de meilleure valeur.

En tant que principale plateforme mondiale d'échange de machines d'occasion en Chine, nous nous situons à l'intersection de la technologie IoT et du commerce B2B. Cela signifie des données d'inventaire en temps réel, des profils de vendeurs vérifiés et un processus de transaction conçu pour les acheteurs transfrontaliers qui ne peuvent pas toujours inspecter les machines en personne. Nos utilisateurs en Chine ont dépassé 1,5 million, ce qui signifie que nous avons la première source de propriétaires de pelles et le nombre équivalent de machines. Cela signifie que nous pouvons couvrir tous les modèles populaires et même des besoins spécifiques, quel que soit l'état.